TECHNICAL INFORMATION FOR HOLDS

POLYESTER HOLDS

Material: Aztec holds are made of polyester.

Colors: During the production of holds, we use tinting pigments to produce bright and juicy colors. You can easily clean our holds and their color will not change. For today, we produce our climbing holds in 8 standard colors and 2 fluorescent colors:

Red, Blue, Yellow, Green, White, Black, Orange, Purple, Green fluorescent, Pink fluorescent.

Attention! Do not install holds of fluorescent colors outdoors. The color of the hooks may fade due to exposure to sunlight.

3028 ral

5015 ral

1018 ral

6037 ral

9016 ral

9005 ral

2003 ral

4008 ral

Green fluor

Pink Fluor

Friction: The friction of the hold is achieved by applying quartz sand to the surface of the hold. You can use, wash, fill them with chalk, and they will not lose their friction properties.

Characteristics: The weakest part of any holds is its attachment. We solved this problem by adding an aluminum insert to the attachment sites. You can install our handholds and not be afraid that the handhold will break or deform.

Fixation: We offer 3 types of fixation for our climbing holds. The first type is the classic fixation with M10 bolt and one hole for screw. The second type is fixation with screws only. And the third type offers the possibility to choose fixing the hold with M10 bolts or with screws only.

Fixation during the construction of the climbing wall. The first type is fixation with self-tapping screws.

Fixation during the construction of the climbing wall. The second type - fixation with self-tapping screws and an M10 bolt

Fixation during the construction of the climbing wall. The third type - fixing the hooks with the M10 bolt

Recommendations:

Install holds on a smooth surface and fixed at all mounting points.
Do not use chemicals during cleaning the holds. It can affect the color and surface of the hold.

POLYURETHANE HOLDS

Material: Aztec holds are made of polyurethane.