We manufacture the framework of climbing walls from rolled steel in accordance with GOST R 58066.1-2018 Climbing stand (climbing wall).
The panels of the Aztec climbing walls are made of high-quality birch plywood with a thickness of 18 mm. For today, we offer 3 ways for covering the climbing wall panels:
A special feature of the panels with a friction coating is a special type of friction that simulates friction on natural rock terrain. The friction of the panel is achieved by applying a thin layer of quartz sand with its rough structure to the surface of the panel.
On the outer corners of the climbing wall, we install special steel pads that prevent the rope from rubbing during climbing.
During the installation of the climbing wall, we use our own combination technology, which allows us to eliminate the gap between the panels.
In climbing, we need special safety equipment. In equipping the insurance points, we use only certified equipment that can withstand a load of up to 2 tons.
To ensure safety on bouldering climbing walls, we install sports mats of our own production. The mats are connected by a special textile fastener. We comply with the requirements for sports mats according to GOST R 58066.2-2018.